JUST DUST® Shaker: SO EASY TO USE

JUST DUST<sup>®</sup> Shaker: <br> SO EINFACH FUNKTIONIERT’S

You don't have a JUST DUST Shaker instead of a JUST DUST Bag? Click here for the Bag instructions.

Get ready for the paint roller revolution. JUST DUST® is super easy to use. Just add the right amount of water, mix well and you're ready to go. Once mixed, you have a highly opaque dispersion paint for all paintable surfaces such as plaster, filler, woodchip or paper wallpaper, paper fleece, plasterboard, gypsum fibreboard and concrete. Are you ready? Then let's get started:

SHAKEN, NOT STIRRED

01 – PREPERATION

The wall/surface to be painted must be clean and dry.

After taping the wall, proceed as follows:

Just Dust Shaker
a bucket with water at room temperature
a base
the supplied paint roller

02 – OPENING

Take the shaker, cut the official seal with a twist and remove the cap. Take out the packet of JUST DUST and place the shaker on a flat surface with the arrow on the top.

03 – FILL WITH WATER

Pour water up to the inner mark in the lid (250ml).

MPORTANT:

Always pour the water first and then the powder into the shaker!

04 – ADD POWDER

Then open the packet and add the powder to the water in the shaker.

Re-insert the cap onto the shaker.

05 – SHAKEN

Show off what you learned from Tom Cruise in "Cocktail":

Shake for about 60 seconds. Then let the shaker stand for about 3 minutes before slowly removing the lid.

06 – FILLING

Done! Now you are ready to pour the finished dispersion paint into a standard paint tray or other suitable container and start painting.

You don't have a paint tray or container? You will find everything you need for painting in our shop.